Short wavelength optical characterization of aerosol nanoparticles in a flow tube

Paulus Bauer, Heinz Amenitsch, Herwig Peterlik, Paul Winkler

Publications: Working paper

Abstract

Gas-to-particle conversion is known to dominate the aerosol number concentration in the global atmosphere (Kulmala et al., 2004). The rigorous study of airborne particles in the size range from 1 nm to 50 nm is hence crucial for a better understanding of the underlying nanoparticle formation mechanisms. Conventional techniques are able to retrieve size information from electrical mobility analysis or use mass spectrometers to determine the chemical composition of nanoparticles. However, most techniques suffer from insufficient time resolution (Winkler et al., 2012).
Noninvasive optical approaches provide size and structure information at time scales as low as milliseconds. To this end, wavelengths close to the size of the particles are needed. For the study of nanoparticles this implies radiation at wavelengths close to or below 1nm. Accordingly, x-rays (ca. 0.2 – 1 nm) can be considered appropriate for optical nanoparticle characterization.
Small Angle X-ray Scattering (SAXS) is commonly used in material science or in biochemical process analysis in order to acquire structural information from 1 nm to 50 nm. In aerosol science this approach promises in situ information on
nucleation mode particles (Laksmono et al., 2011). Here we report experiments conducted recently at the SAXS beamline at the Elettra synchrotron Triest. We have chosen this beamline due to high beam intensity and the available experience on aerosol studies in flow tubes (Jungnikl et al., 2011). We extended this approach to the study of newly formed biogenic particles from the ozonolysis of α-pinene. To provide a representative environment for aerosols a flow tube with a movable inlet for variable residence time was used. Figure 1 displays a sketch of the flow tube setup at the synchrotron. A Differential Mobility Particle Sizer (DMPS) and a Condensation Particle Counter (CPC) were run in parallel to allow direct comparison of the SAXS data to the conventional aerosol measurements. Figure 2 presents SAXS intensities of biogenic nanoparticles measured at different inlet positions, reflecting the particle evolution at different residence times.

This work was supported by the European Research Council under the European Community's Seventh Framework Programme (FP7/2007-2013) / ERC grant
agreement No. 616075.
Kulmala, M., et al. (2004). J. Aerosol Sci. 35, 143.
Winkler, P. M., et al. (2012). Geophys. Res. Lett . 39, L20815.
Laksmono, H. et al. (2011). Phys. Chem. Chem. Phys . 13, 5855.
Jungnikl, K., et al. (2011). Aerosol Sci. Technol. 45, 7, 805.
Original languageEnglish
Publication statusPublished - 16 Jun 2015

Austrian Fields of Science 2012

  • 103008 Experimental physics
  • 105904 Environmental research
  • 103039 Aerosol physics

Cite this